tag:blogger.com,1999:blog-244423732024-03-13T11:17:37.447-06:00Me, CherkyBThe blog dedicated to taking over the world through attrition. Are you still here? So am I.CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.comBlogger875125tag:blogger.com,1999:blog-24442373.post-44887158634559776592018-12-04T22:48:00.001-07:002018-12-05T10:18:07.007-07:00Pipemaking with CherkyB - Pipe #2One week after making <a href="https://cherkyb.blogspot.com/2018/11/pipemaking-with-cherkyb-pipe-1.html">Pipe #1 ("Toilet Pipe")</a>, I took a crack at pipe #2. This was also a bent ebauchon <a href="https://vermontfreehand.com/product/briar-pipe-kit/" target="_blank">pipe kit from Vermont Freehand</a>. Again, I'm just going to show some photos at different stages of the build and not try to teach you how to do it, as I barely know myself at this point.<br />
<br />
In the spirit of continuous improvement, I decided on three goals for this pipe:<br />
<br />
<ol>
<li>I wanted to leave the "plateaux" (which is pipe-speak for the rough edges where the bark is), as a lot of fancy handmade pipes do this, and it's considered a sign of good craftsmanship to incorporate that into the design. Though, it turns out, not with this kind of block or the way I did it...more on that later.<br />
<br />
</li>
<li>I wanted to carve the shank to be the same diameter as the stem, as I was afraid to do that on Toilet Pipe, but it bothered me that the diameters did not match.<br />
<br />
</li>
<li>I wanted to dramatically cut down on the build time from the 23+ hours to something that seemed more sustainable. I was getting quite a bit of pressure from Korn Kob to improve this metric.</li>
</ol>
Here's the kit as it comes from the shop:<br />
<br />
<a href="http://3.bp.blogspot.com/-lhTzalfl83Y/XAda47_2fPI/AAAAAAAANfw/4JeLrBgtPzgjKfDc-ljq9hAkH8AzzXwJwCK4BGAYYCw/s1600/IMG_20180824_082243186.jpg" imageanchor="1"><img border="0" height="245" src="https://3.bp.blogspot.com/-lhTzalfl83Y/XAda47_2fPI/AAAAAAAANfw/4JeLrBgtPzgjKfDc-ljq9hAkH8AzzXwJwCK4BGAYYCw/s400/IMG_20180824_082243186.jpg" width="400" /></a><br />
<br />
Note the beautiful bark plateaux down the front right corner, the preservation of which was design goal #1. However, also note if you click on it to see it full size, how the front left corner is not that nice-looking but also would need to be preserved for symmetry.<br />
<br />
<a href="http://4.bp.blogspot.com/-VhYLfTvYo8s/XAda4pDsIQI/AAAAAAAANfs/T0TYMeekMu0z5eJPUROehVoAjGcr_cHZwCK4BGAYYCw/s1600/IMG_20180824_082949867.jpg" imageanchor="1"><img border="0" height="400" src="https://4.bp.blogspot.com/-VhYLfTvYo8s/XAda4pDsIQI/AAAAAAAANfs/T0TYMeekMu0z5eJPUROehVoAjGcr_cHZwCK4BGAYYCw/s400/IMG_20180824_082949867.jpg" width="251" /></a><br />
<br />
One of the big time-savings methods I applied here was to go from the band saw directly to the 4" belt sander and sanding disc rather than messing around with a bunch of wood files. You can see how I've sanded down the shank to match the diameter of the stem, achieving design goal #2. I spent a lot of energy worrying about being off-center on the air bore and accidentally sanding through it, but if you take breaks and put something straight into the bore (I used a nail), you can draw where the air bore is to guide you. Though the pencil keeps getting sanded off, so you have to do it at regular intervals without taking off too much material between sanity checks.<br />
<br />
<a href="http://1.bp.blogspot.com/-4fJNBSCPVu8/XAda4vXZ1AI/AAAAAAAANfc/6-MkqQyM3PM5a8vdK0MqEvfIq8cRPLMGQCK4BGAYYCw/s1600/IMG_20180825_162856180.jpg" imageanchor="1"><img border="0" height="400" src="https://1.bp.blogspot.com/-4fJNBSCPVu8/XAda4vXZ1AI/AAAAAAAANfc/6-MkqQyM3PM5a8vdK0MqEvfIq8cRPLMGQCK4BGAYYCw/s400/IMG_20180825_162856180.jpg" width="215" /></a><br />
<br />
I didn't want a pipe that just looked like a big rectangular block, though preserving the bark meant I could not really do anything traditionally round. I made the top heptagonal - basically an octagon with the back side (where the stem is) missing. I chamfered the lower sides in below the plateaux. Then, it still looked to slab-like in front, so I used some files to carve a V-shaped notch into it.<br />
<br />
<br />
<a href="http://1.bp.blogspot.com/-MOenJguv9sg/XAda3c_yahI/AAAAAAAANfI/TZmzoerP4HEuAhi8uWbT9IFSe_4XrEDEwCK4BGAYYCw/s1600/IMG_20180825_182905791.jpg" imageanchor="1"><img border="0" height="400" src="https://1.bp.blogspot.com/-MOenJguv9sg/XAda3c_yahI/AAAAAAAANfI/TZmzoerP4HEuAhi8uWbT9IFSe_4XrEDEwCK4BGAYYCw/s400/IMG_20180825_182905791.jpg" width="241" /></a><br />
<br />
<br />
Here is the completed pipe. I finished it similarly to <a href="https://cherkyb.blogspot.com/2018/11/pipemaking-with-cherkyb-pipe-1.html">pipe #1</a>, with layers of burgandy and tan, and I rubbed them out a bit with rubbing alcohol, though not too aggressively as it has a tendency to remove a lot of stain. I'm pretty happy with how the stem and the shank mate on this one compared to on the first pipe. That was a definite improvement.<br />
<br />
<a href="http://4.bp.blogspot.com/-GRVaE5PTxyI/XAda5GvK9WI/AAAAAAAANf4/uygblNsUQh49AJfsCs2SY5UiAPYDCT7bQCK4BGAYYCw/s1600/IMG_20180825_200058123.jpg" imageanchor="1"><img border="0" height="325" src="https://4.bp.blogspot.com/-GRVaE5PTxyI/XAda5GvK9WI/AAAAAAAANf4/uygblNsUQh49AJfsCs2SY5UiAPYDCT7bQCK4BGAYYCw/s400/IMG_20180825_200058123.jpg" width="400" /></a><br />
<br />
The plateaux looks OK. One side looks great, with the stain darkening up and accentuating the irregularity of the bark. The other looks like I forgot to sand out the tool marks.<br />
<br />
<a href="http://2.bp.blogspot.com/-BWekjhAm_u8/XAda4_dFCjI/AAAAAAAANf0/cMIFTqrP6wgTzRq8g6T5Mt5U7WKhGE2egCK4BGAYYCw/s1600/IMG_20180825_200106852.jpg" imageanchor="1"><img border="0" height="351" src="https://2.bp.blogspot.com/-BWekjhAm_u8/XAda4_dFCjI/AAAAAAAANf0/cMIFTqrP6wgTzRq8g6T5Mt5U7WKhGE2egCK4BGAYYCw/s400/IMG_20180825_200106852.jpg" width="400" /></a><br />
<br />
Total build time for this was just five hours. Up close, you can tell that I cut too much time off the finish sanding, as there are noticeable sanding scratches that I didn't get completely out, and it just doesn't shine like pipe #1.<br />
<br />
If you look at the front of this pipe, my always-supportive family decided it looks like someone's behind and legs, so they christened this pipe, "Butt Pipe."<br />
<br />
Now, let's talk about what went wrong with this design. Unlike Toilet Pipe, I smoked this pipe. It smokes terribly. There are two main problems, both of which stem from the decision to preserve the plateaux.<br />
<br />
First, you immediately notice how heavy it is. It's just uncomfortable to hold the stem in your teeth given the giant block of wood hanging out at the end of the stem. The angular design also makes it uncomfortable in the hand. So there's no really enjoyable way to smoke this pipe.<br />
<br />
Second, the tobacco chamber is much too deep for the diameter. This block of briar really needed to be brought down in height to a more manageable depth-to-diameter ratio. We're looking at a bore that is over 1.5" deep, and only about 3/4" in diameter. It's hard to keep lit, and it's hard to get a flame down in there to light it if it goes out.<br />
<br />
I learned a lot on this pipe, so the process of making it was definitely worthwhile, but as a functional pipe, it stinks. Happily, its the only pipe I've made so far (out of a total of 6) that was basically just a piece of furniture.<br />
<br />CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-79260327650169837012018-11-21T00:47:00.001-07:002018-12-04T21:42:04.143-07:00Pipemaking with CherkyB - Pipe #1Back when I was regularly weather vlogging over at <a href="http://cherkybackup.blogspot.com/" target="_blank">CherkyB, Weather or Not</a>, I would often appear with a pipe. Usually, <a href="http://cherkybackup.blogspot.com/2012/10/fall-colors.html" target="_blank">it was my first pipe</a> - a beautiful meerschaum carved into a bison head (having grown up in a suburb of Buffalo, I am fond of the bison motif, though around here, it usually means you are a Colorado Buffalos fan which I am not).<br />
<br />
Long before there was Facebook to distract everyone with an endless supply of bogus urban legends urging you to forward them to all your friends to protect them from the giant alien ants that are handing out GPS tracking keychains so that they can follow you home to give you cancer from a Monsanto product and then demand a do-over on the last election, The Internet had developed a lore.<br />
<br />
You'd come across it whenever you decided to pick up a new hobby. There were just certain things that a novice researching something on The Internet would always conclude for various topics.<br />
<br />
For instance, revolvers are far superior to self-loaders, and the optimum cartridge for a revolver is the .357 magnum, and the best model of .357 magnum is the Colt Python.<br />
<br />
All of that is baloney. Each and every assertion in that internet lore is wrong.<br />
<br />
Then, if you decide you really must have a self-loader, The Internet would steer you invariably to the CZ-75. The absolute most bestest self-loader evah. Except no one shoots one. I held one in my hand once at a gun store cuz a friend was interested in getting one due to internet research. You could see the voids in the frame castings. You could practically hear the clerk thinking, "Oh great. An internet shooter."<br />
<br />
Oh, and if you wanted a pickup, the Dodge Ram 2500 with a Cummins Turbo Diesel was the only pickup that would last more than five years. It would last 1 million miles with no maintenance other than changing filters.<br />
<br />
If you are a novice pipe smoker, and you do a bunch of research on The Internet, you will become absolutely convinced that meerschaum is the optimal pipe material. You'll learn how it doesn't absorb any juices, so it doesn't ever "sour" or pick up a permanent flavor from the tobacco. This means you don't have to dedicate a pipe to each blend of tobacco (I think only hard-core people do this), and you don't have to have seven pipes (one for each day of the week) to let each "rest" for a week to dry out in between smokes. It also stays pretty cool when you smoke it, it's a light material, and of course, it's easily carved into ornate little sculptures. It's just absolutely perfect.<br />
<br />
You know, except for that one thing.<br />
<br />
It's a little brittle, especially when it gets hot. But a fine internet-trained aficionado knows how to handle it, so this is really only a problem for the proles.<br />
<br />
A little brittle. Eggshells routinely challenge meerschaum to fights without any worries of being cracked. People place their finest china around meerschaum pipes to serve as armor. These things are more brittle than a pampered, rich college sophomore who has just converted to veganism and was shocked, shocked! when she stood up in calculus class to state that her answer to the quiz question was only "wrong" because of the patriarchy, and then she heard someone snicker.<br />
<br />
Yeah, I busted the hell out of it in short order. Really, just trying to remove the stem to clean it (after it had completely cooled) caused the stem to not just break off, but to shatter into about five pieces. I glued it back together with CA glue (something that it turns out is not recommended cuz no one really knows what kind of toxic out-gassing CA glue does when hot, and the manufacturers of it just tell you, "don't do that.") I smoked it for a while longer, then busted it again the same way.<br />
<br />
Well, f---- that. The Internet is a liar. I entered the dark side - I switched to non-optimal pipes made of briar burl.<br />
<br />
The nice thing about wood pipes is that you have a built-in excuse to get more of them, given how you're "supposed" to have one for every day of the week and for every blend of tobacco. I started to build a supply (well, really, three).<br />
<br />
And then I decided it was time to try to make one myself. I had stumbled across some instructions on that a few years earlier, and I had always planned to try it, but I never did.<br />
<br />
I watched a bunch of YouTube videos on how to do it, because unlike The Internet (which is a liar) and Facebook (which is designed specifically to optimally circulate lies for advertising purposes), YouTube is pristine. In YouTube, you don't get someone holding up a pipe and saying, "I made this with just a toothbrush and a paper clip, and you won't believe how!" and then you have to click through a 20 page slideshow that wants permission to scrape all your friends' contact information and to make postings for you and in the end, you have no idea how it was made, but you sure know how to save money on car insurance.<br />
<br />
No, on YouTube you can actually watch the person make the object. And learn how. Though sometimes you have to watch 5 seconds of an ad at the beginning that you can click through. My favorite part is that you can watch at different speeds. I watch almost all YouTube video at 1.5x speed, so I can learn 50% faster!<br />
<br />
I'm going to start rendering all my YouTube videos at 67% speed so that selecting 1.5x brings you back to normal. OK, not really. But some day, I will have some pipe making videos of my own. Not yet, as I'm still not good enough at it to teach anyone. I've made a grand total of five pipes so far, of which I would say two are very good, two are so-so, and one sucks.<br />
<br />
I decided to start out slowly. I ordered two "<a href="https://vermontfreehand.com/product/briar-pipe-kit/" target="_blank">Ebauchon bent" pipe kits</a> from Vermont Freehand, which seems to be the only real supplier that has a web storefront of most anything you need for pipemaking. I have continued to get all my supplies from Steve at Vermont Freehand, though I've graduated up from the kits.<br />
<br />
What makes a "kit" is that the wood block is pre-drilled and the stem is pre-fit. Drilling the wood isn't all that complicated, though there are a couple tools that make it easier. You have to drill the 1/8" air hole from wherever you want to put the stem to wherever you want the bottom of the tobacco chamber to be. Then you have to drill out the tobacco chamber with a rounded bottom just to the depth of the air hole - which means you get a normal spade bit and grind off the end of it into something like a 1" radius arc. Then you come back and do a 5/16" bore into which to fit the stem, and then use something like a forstner bit to flatten the wood where you drilled the stem bore so the face is exactly perpendicular to the bore, though VF sells a combined forstner with 5/16" drill bit through the center that does this in one step.<br />
<br />
Fitting the stem is actually much harder. They come rough - right out of the mold with mold lines on the sides and kind of a random diameter at the shank from design-to-design. I still stink at this step, but we'll discuss that on pipe #5...<br />
<br />
I got the kit to avoid this trouble. I got ebauchon because it's a cheaper cut of wood (being more from the center and having less dramatic grain), and I didn't want to throw money away on plateaux on stuff I'd probably mess up the first few tries.<br />
<br />
Years ago when I had first researched pipe making, I watched a YouTube series from a guy who claimed you could carve pipes with basically nothing more than a few hand files and a vice. I can't for the life of me find those videos anymore, but I bought a vice. I'd always needed one. I already had files (though I bought <a href="https://www.woodcraft.com/products/10pc-smooth-cut-riffler-file-set" target="_blank">a few more</a>). I didn't want to buy a bunch of woodworking tools if I was going to stink at pipemaking.<br />
<br />
I didn't expect to ever start blogging (or vlogging) again, so I didn't do a great job documenting these first few pipes. But, I used to share the photos of each stage with friends, and one of them was adamant that I put them on The Internet. So, you can thank the Korn Kob for my return.<br />
<br />
Here is the pipe kit before I have done any work to it. It's just a drilled block of wood with a straight stem fit to it. I remember from the "files and a vice" guy that the way you hold the "stummel" (which is what the wooden part of a pipe is called) is with an old broomstick in a vice that is stuck into the tobacco bore. I wrapped this one in blue tape as it was a little too narrow for the bore.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-RyEj1xtO3tY/W_T_UtV1U3I/AAAAAAAANIc/FIz_ZgdQJWASOJeDxSO-LZiw7pmVBKMPgCLcBGAs/s1600/IMG_20180818_174345700_HDR.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1496" data-original-width="1600" height="299" src="https://2.bp.blogspot.com/-RyEj1xtO3tY/W_T_UtV1U3I/AAAAAAAANIc/FIz_ZgdQJWASOJeDxSO-LZiw7pmVBKMPgCLcBGAs/s320/IMG_20180818_174345700_HDR.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
I drew some rough "pipe shaped" reference lines on the outside of the briar block, then I went to my crappy band saw to rough cut. This band saw is junk. I had spent hours adjusting the thrust bearings using a feeler gauge and had put on a brand new blade, and still, it can't follow a line. Both sides of this were supposed to be cut identically, but the saw blade likes to wander randomly. I've largely stopped using the band saw anymore. I should throw it in the garbage, but maybe I can pass it on to some cub scout parent who needs to "help" his scout make a pinewood derby car. That was what the original owner of this saw got it for, then he sold it to me cheap when his kids got out of cub scouts, and mine was getting into it.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-FlWmg-a_sck/W_T_UoSm5rI/AAAAAAAANIY/8BXyQvmdKIgvtfNFnhSDDSFzyXPU5vnKACLcBGAs/s1600/IMG_20180819_140824438_BURST000_COVER_TOP.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1600" data-original-width="1200" height="400" src="https://2.bp.blogspot.com/-FlWmg-a_sck/W_T_UoSm5rI/AAAAAAAANIY/8BXyQvmdKIgvtfNFnhSDDSFzyXPU5vnKACLcBGAs/s400/IMG_20180819_140824438_BURST000_COVER_TOP.jpg" width="300" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://3.bp.blogspot.com/-ZFd4N6utKxY/W_T_U03jfpI/AAAAAAAANIg/bl1xpoonMRAqwkFbRoQ79LnrkpBGhu_PQCLcBGAs/s1600/IMG_20180819_140832595.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1521" data-original-width="1600" height="304" src="https://3.bp.blogspot.com/-ZFd4N6utKxY/W_T_U03jfpI/AAAAAAAANIg/bl1xpoonMRAqwkFbRoQ79LnrkpBGhu_PQCLcBGAs/s320/IMG_20180819_140832595.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Here we are now after literally hours of working on this thing with files and rasps. I later learned that coarse wood rasps are not a very good tool for shaping the briar, as they leave deep gouges that take forever to sand out. You need to stick with the "fine" side of a wood file.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-y_rk3lvj_vw/W_T_VvEb3uI/AAAAAAAANIk/ikWwK3bowTEUuRFwT0DgkR5UrmXSLAuoQCLcBGAs/s1600/IMG_20180819_145748357.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1600" data-original-width="1200" height="400" src="https://1.bp.blogspot.com/-y_rk3lvj_vw/W_T_VvEb3uI/AAAAAAAANIk/ikWwK3bowTEUuRFwT0DgkR5UrmXSLAuoQCLcBGAs/s400/IMG_20180819_145748357.jpg" width="300" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
After a little more work, I got to discover what every internet pipemaker warns about - you don't ever know what is inside a briar burl until you start to carve it. They grow in sandy areas and have a tendency to encapsulate sand as well as to have other miscellaneous voids in them. I would later have to go to The Internet to find that everyone has a different opinion of what to do about voids like this, but I decided to press on with the sanding, as this was, in my mind, always just a practice pipe to begin with. One popular choice - just don't fill it - was off the table, because that group of 4 holes on the side right where the shank meets the bowl actually penetrated all the way to the air hole - meaning the pipe would be unsmokable without filling those. The remainder of the flaws were cosmetic.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-1MXvIO18Bpo/W_T_X6vwjPI/AAAAAAAANIs/8WH4hYFUzvUlKX1D89uaUAv_R5Xxt5AuwCLcBGAs/s1600/IMG_20180819_154814078_LI.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1469" data-original-width="1600" height="366" src="https://2.bp.blogspot.com/-1MXvIO18Bpo/W_T_X6vwjPI/AAAAAAAANIs/8WH4hYFUzvUlKX1D89uaUAv_R5Xxt5AuwCLcBGAs/s400/IMG_20180819_154814078_LI.jpg" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The other thing I decided was, "Screw the European YouTube guy and his stupid hand files. I'm an American. And as an American, it is my God-given right to apply power tools." Especially given all the deep gouges I had in the wood from the rasps...</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Now, another little aside. This combination belt/disc sander from Harbor Freight is neck-and-neck with the band saw for crappiest power tool I own. I think this one is actually the second crappiest tools, but only because it actually does function as a sander. You know, until you have to change the belt, in which case you discover that the casing has to be disassembled to do that (around a dozen little machine screws), then when you go to put it back together after changing the belt, you discover that the seemingly identical machine screws are actually three different lengths (in about 1/16" increments), but there's no diagram anywhere telling you which screw lengths are needed in each of the identical-looking holes. So you go by trial and error trying to find screws that will both go in all the way and bite into something. And finally, you decide out of frustration that it doesn't need that many screws, and you gently place the remaining screws somewhere <i>over there</i> via air express flight.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
If there's one thing you take away from this post it is do not buy this sander. I don't care that with a coupon it's only $35. You see that beautiful miter gauge slot on the disc sanding shelf. Take a close look - it's not parallel to the sanding disc, and it can't be. The mounting point for it is cast at an angle. Such an angle that out of the box, the shelf scraped on the disc, though the disc has sanded the edge off it now. </div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://4.bp.blogspot.com/-iArhVXnw2hw/W_T_YDTyWyI/AAAAAAAANI0/FT2gzpaAjgIINzLHGJ_Dhkejx9il9Z-BQCLcBGAs/s1600/IMG_20180819_163606912.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1600" data-original-width="1200" height="400" src="https://4.bp.blogspot.com/-iArhVXnw2hw/W_T_YDTyWyI/AAAAAAAANI0/FT2gzpaAjgIINzLHGJ_Dhkejx9il9Z-BQCLcBGAs/s400/IMG_20180819_163606912.jpg" width="300" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
With some belt sanding and a whole lot of hand sanding, I've gotten it pretty smooth for this photo. I think I've only gone to 400 grit at this point in the crafting. You end up around 1500 grit, but first I needed to make the patch. I settled on what many on The Internet recommended - saw dust from the briar mixed in with carpenters' yellow wood glue. That has to dry for 24 hours.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-F-uFdjL2GLo/W_T_Y6oFRcI/AAAAAAAANI4/OvR4DqT1z6suPUiZueb1-7m8pO9k1LupgCLcBGAs/s1600/IMG_20180820_210956809.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1537" data-original-width="1600" height="307" src="https://1.bp.blogspot.com/-F-uFdjL2GLo/W_T_Y6oFRcI/AAAAAAAANI4/OvR4DqT1z6suPUiZueb1-7m8pO9k1LupgCLcBGAs/s320/IMG_20180820_210956809.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
I would call this significantly improved. Note that the second picture is showing you the worse side that had all the holes I circled in red on a picture above. You can really see the grain of the briar burl start to assert itself in these photos. The totally random grain patterns is one reason burl is popular for pipes. It's very artsy.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-3UaKhQQb_bA/W_T_ZWpxIsI/AAAAAAAANI8/9LtRindE6MgRn-rYo386BW5LVcDgcuO6gCLcBGAs/s1600/IMG_20180821_223109209.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1200" data-original-width="1600" height="300" src="https://2.bp.blogspot.com/-3UaKhQQb_bA/W_T_ZWpxIsI/AAAAAAAANI8/9LtRindE6MgRn-rYo386BW5LVcDgcuO6gCLcBGAs/s400/IMG_20180821_223109209.jpg" width="400" /></a></div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-NzNPxjiWFVs/W_T_ZxjE8aI/AAAAAAAANJA/glW8R-WKlzAtfrMtHY0RvS2pahOSYXs9ACLcBGAs/s1600/IMG_20180821_223119483.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1338" data-original-width="1600" height="333" src="https://2.bp.blogspot.com/-NzNPxjiWFVs/W_T_ZxjE8aI/AAAAAAAANJA/glW8R-WKlzAtfrMtHY0RvS2pahOSYXs9ACLcBGAs/s400/IMG_20180821_223119483.jpg" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: center;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Now comes the staining. For pipes, you use an alcohol-based stain. I don't remember why, exactly. Don't want to raise the grain, perhaps. The most common alcohol-based stain is Fiebing's leather dye. It comes in a ton of colors. I decided to do the top in just tan, and then the remainder of the stummel in a couple deep burgundy base coats with a couple layers of tan over them. I was trying to make the grain really pop. In the photo, I've applied two red coats and two tan coats, and I've just ended up obscuring the grain - the opposite of what I wanted. Though you can clearly see the contrasting rim that just has tan.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://1.bp.blogspot.com/-WbTZEeelYTE/W_T_ZwWCyiI/AAAAAAAANJE/1el5VfxTeEcAaDeMuNdqmsezQcE0JCaqgCLcBGAs/s1600/IMG_20180822_072828895.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="743" data-original-width="1600" height="185" src="https://1.bp.blogspot.com/-WbTZEeelYTE/W_T_ZwWCyiI/AAAAAAAANJE/1el5VfxTeEcAaDeMuNdqmsezQcE0JCaqgCLcBGAs/s400/IMG_20180822_072828895.jpg" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Alcohol-based stain is really cool in that it not only dries super-fast, but you can really thin it out by wiping it with a little rubbing alcohol. I rubbed it all down, which almost took it all off, then went with one red and one tan.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://3.bp.blogspot.com/-byH7ywbjiKo/W_T_aSf-hRI/AAAAAAAANJI/J9O-ioOiXJooF4xjH2CMkP8_pjVk_4fSQCLcBGAs/s1600/IMG_20180822_072838195.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="900" data-original-width="1600" height="223" src="https://3.bp.blogspot.com/-byH7ywbjiKo/W_T_aSf-hRI/AAAAAAAANJI/J9O-ioOiXJooF4xjH2CMkP8_pjVk_4fSQCLcBGAs/s400/IMG_20180822_072838195.jpg" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Now, it's time to bend the stem. This is done with a heat gun (I used low heat setting), and a bath of ice water to plunge the stem into to set the bend. If you mess it up, you just reheat and do it over. The only think you can really mess up is you can bubble the vulcanite if you use too high a heat for too long. But you'll bubble your finger, too, if you do that. Oh, and you're supposed to put a pipe cleaner into the air bore before bending in order to prevent pinching off the bore. If you forget that step, i'm not sure you can recover from it.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
I took a couple tries, but I got the curve I was looking for. Some recommend making a bending jig so that you can exactly get the curve you want. I kinda tried this using a few different cylinders, but I found it was easier to just freehand bend it around the curve of my thumb. One interesting thing is that after I finished my second pipe stem, I laid it next to the first, and they had nearly identical curves. Apparently, the curvature of my thumb when I bend it back is a constant...</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://3.bp.blogspot.com/-BT1OVm0N24Q/W_T_bRBWbeI/AAAAAAAANJQ/1eNvUO14e5Ql-B2WsG7Jxwg9isRfYDHIACLcBGAs/s1600/IMG_20180822_203503680.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1574" data-original-width="1600" height="314" src="https://3.bp.blogspot.com/-BT1OVm0N24Q/W_T_bRBWbeI/AAAAAAAANJQ/1eNvUO14e5Ql-B2WsG7Jxwg9isRfYDHIACLcBGAs/s320/IMG_20180822_203503680.jpg" width="320" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Now time for more power tools. I have a drill-mounted polishing kit (also from Harbor Freight) that has a couple felt pads on drill shafts, and a couple types of polishing compound. I selected the "white diamond" compound which I hear is equivalent to 800 grit, though different pipemakers use different compounds (red tripoli also being popular and about 400 grit and is probably the other compound in the kit). Some even use both, but you have to have a different polishing wheel for each type. The people who address this head on mostly claim it makes no real difference which compound you use. It did shine it up quite a bit more than I expected given that I'd worked up to 1500 grit sandpaper, so an ~800 grit polishing compound you'd expect to make it rougher rather than smoother, but the high speed of the wheel really beats anything you can do by hand. </div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
You have to polish both the wood and the stem.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-2QEZCa_L4J4/W_T_bM5XXqI/AAAAAAAANJM/ZC-MgTTY5UQH4e6BXjE3PkvYuB8YDDP8wCLcBGAs/s1600/IMG_20180822_210908959.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="733" data-original-width="1600" height="182" src="https://2.bp.blogspot.com/-2QEZCa_L4J4/W_T_bM5XXqI/AAAAAAAANJM/ZC-MgTTY5UQH4e6BXjE3PkvYuB8YDDP8wCLcBGAs/s400/IMG_20180822_210908959.jpg" width="400" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
Time to look at the flaws that aren't going to buff out.</div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
I have a little gap at the stem fitting because I decided to sand the mating surface a bit. Everyone tells you not to do this cuz you'll never be able to sand it perfectly flat and perfectly perpendicular to the stem bore. You can add me to that list of everyone. Don't do it, or you'll end up with a gap like this.</div>
<br />
Also, where the shank meets the bowl I had been going at that pretty hard with a rat tail file to shape it. It turns out it's really tough to sand an inside double-radiused curve like that, so you can still see the rough slash from the file. I never really figured out a good way to sand something like that (used sponges and <a href="https://www.woodcraft.com/products/woodriver-8-piece-complete-sanding-pad-set" target="_blank">fancy radiused sanding blocks</a>, but pft, no). On future pipes, I was conscious of this limitation and designed it out.<br />
<div class="separator" style="clear: both; text-align: center;">
</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-mgo4JbWT6qk/W_T_buogHKI/AAAAAAAANJY/j_Ucy5kCrwI9-46iP0838iU8Oo-7UcW3QCLcBGAs/s1600/IMG_20180822_210914362_LI_Moment.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1600" data-original-width="823" height="640" src="https://2.bp.blogspot.com/-mgo4JbWT6qk/W_T_buogHKI/AAAAAAAANJY/j_Ucy5kCrwI9-46iP0838iU8Oo-7UcW3QCLcBGAs/s640/IMG_20180822_210914362_LI_Moment.jpg" width="328" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
The last step is a bunch of coats of pure carnauba wax. You buy a block from Amazon, where it's mostly sold for car detailers, and you use a fresh buffing wheel to apply it (not the same wheel you covered in polishing compound). You wax both stummel and stem. This does the same thing that waxing a car does - it adds a "depth" and shine to the finish, and it also protects the wood from liquids and oils from your hand.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://4.bp.blogspot.com/-KMkbGF-8NeM/W_T_ctwC-7I/AAAAAAAANJg/zxDePrgL7Lk3PcTGsRdax8zaWVDmm3WTQCLcBGAs/s1600/IMG_20180822_213919418_LL.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="717" data-original-width="1600" height="286" src="https://4.bp.blogspot.com/-KMkbGF-8NeM/W_T_ctwC-7I/AAAAAAAANJg/zxDePrgL7Lk3PcTGsRdax8zaWVDmm3WTQCLcBGAs/s640/IMG_20180822_213919418_LL.jpg" width="640" /></a></div>
<div class="separator" style="clear: both; text-align: left;">
<br /></div>
<div class="separator" style="clear: both; text-align: left;">
The "bad side" of the pipe still shows the patch right where the shank meets the bowl. It's better than it was when it was not filled and leaked air, though.</div>
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="https://2.bp.blogspot.com/-Vsqnc5hb-yA/W_T_cFNXJaI/AAAAAAAANJc/JWbSL7u7v4EBDT6MN1KPo7GkWMxuvTg1ACLcBGAs/s1600/IMG_20180822_213930328.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="904" data-original-width="1600" height="360" src="https://2.bp.blogspot.com/-Vsqnc5hb-yA/W_T_cFNXJaI/AAAAAAAANJc/JWbSL7u7v4EBDT6MN1KPo7GkWMxuvTg1ACLcBGAs/s640/IMG_20180822_213930328.jpg" width="640" /></a></div>
<br />
There you go. My first pipe kit built into a pipe using nothing but a vice and some files. And a belt sander. And a heat gun. And glue. And a broomstick. And polishing wheels. And a drill press. Total labor time on it was around 23 hours, though that spanned a few days.<br />
<br />
I've still never smoked this pipe. I kinda want to keep the first one pristine.<br />
<br />
My always-supportive family christened this pipe "Toilet Pipe" because they think the bowl is shaped like a toilet bowl.<br />
<br />CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com1tag:blogger.com,1999:blog-24442373.post-89486491460556983282018-11-20T11:56:00.001-07:002018-11-20T11:56:05.626-07:00Handbell Tree ConstructionI recently designed and built a handbell tree, most of which is documented over at my YouTube channel in this video:<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<iframe allowfullscreen="" class="YOUTUBE-iframe-video" data-thumbnail-src="https://i.ytimg.com/vi/wJr-Hu1wrgQ/0.jpg" frameborder="0" height="266" src="https://www.youtube.com/embed/wJr-Hu1wrgQ?feature=player_embedded" width="320"></iframe></div>
<br />
I want to provide some additional information here beyond what I can do in the "description" field on YouTube.<br />
<br />
First, let me note that in the video, I never installed the O-rings. The O-rings simply slip over the branches and slide to where you want the bells to hang - one O-ring on either side of the bell's handle strap that is looped over the branch. I'll try to get a photo of that, but the bell tree is already over at the rehearsal hall where it is getting regular use, so I'll have to wait until the next time I am there.<br />
<br />
The following is the list of materials I used to construct the bell tree, including hyperlinks to the actual items I bought at Lowe's:<br />
<br />
<div class="WordSection1">
<br />
<table border="1" cellpadding="0" cellspacing="0" class="MsoTable15Grid4Accent5" style="border-collapse: collapse; border: none;"> <tbody>
<tr>
<td style="background: #4472c4; border-right: none; border: solid #4472c4 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
<b><span style="color: white;">Item Use</span></b></div>
</td>
<td style="background: #4472c4; border-bottom: solid #4472c4 1.0pt; border-left: none; border-right: none; border-top: solid #4472c4 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
<b><span style="color: white;">Item<br />
Description</span></b></div>
</td>
<td style="background: #4472c4; border-bottom: solid #4472c4 1.0pt; border-left: none; border-right: none; border-top: solid #4472c4 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
<b><span style="color: white;">Qty</span></b></div>
</td>
<td style="background: #4472c4; border-bottom: solid #4472c4 1.0pt; border-left: none; border-right: none; border-top: solid #4472c4 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
<b><span style="color: white;">Price/unit</span></b></div>
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
<b><span style="color: white;">(Nov 2018)</span></b></div>
</td>
<td style="background: #4472c4; border-left: none; border: solid #4472c4 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
<b><span style="color: white;">Cost</span></b></div>
</td>
</tr>
<tr>
<td style="background: #d9e2f3; border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Wood base</b></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/7-16-Cat-OSB-Sheathing-Application-as-2-X-4/1000405891">2’x4’<br />
7/16” OSB sheathing</a></span></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
1</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$7.82</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$7.82</div>
</td>
</tr>
<tr>
<td style="border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Pipe-to-base attachment</b></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/Mueller-Proline-1-in-dia-Black-Iron-Floor-Flange-Fitting/1000217679">1”<br />
black iron floor flange</a></span></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
1</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$7.78</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$7.78</div>
</td>
</tr>
<tr>
<td style="background: #d9e2f3; border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Attach flange to OSB base</b></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/Hillman-1-4-in-to-20-x-1-in-Phillips-Drive-Zinc-Plated-Machine-Screws-4-Count/3035944">¼”-20x1”<br />
machine screws and nuts</a></span></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
4</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$1.28/4 pack</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$1.28</div>
</td>
</tr>
<tr>
<td style="border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Bottom half of trunk</b></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/Mueller-Proline-1-in-dia-Black-Iron-Floor-Flange-Fitting/1000217679">1”x3’<br />
black iron pipe</a></span></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
1</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$17.67</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$17.67</div>
</td>
</tr>
<tr>
<td style="background: #d9e2f3; border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>PVC to iron pipe connector</b></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/LASCO-1-1-2-in-x-1-in-PVC-Sch-40-Bushing/3371482">1.5”<br />
to 1” threaded bushing</a></span></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
1</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$1.18</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$1.18</div>
</td>
</tr>
<tr>
<td style="border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Connect bushing to top pipe</b></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/LASCO-PVC-Sch-40-Coupling/3307892">1.5”<br />
slip-fit coupler</a></span></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
1</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$0.98</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$0.98</div>
</td>
</tr>
<tr>
<td style="background: #d9e2f3; border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Top half of trunk</b></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/Charlotte-Pipe-1-1-2-in-x-5-ft-330-PSI-PVC-Pipe/3133039">1.5”x5’<br />
SCH40 PVC pipe</a></span></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
1</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$4.90</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$4.90</div>
</td>
</tr>
<tr style="height: 14.35pt;">
<td style="border-top: none; border: solid #8eaadb 1.0pt; height: 14.35pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>T-connector for limbs</b></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; height: 14.35pt; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/LASCO-90-Degree-PVC-Sch-40-Tee/3371492">1.5”<br />
slip to ¾” female threaded T</a></span></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; height: 14.35pt; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
4</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; height: 14.35pt; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$2.98</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; height: 14.35pt; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$11.92</div>
</td>
</tr>
<tr>
<td style="background: #d9e2f3; border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Threaded end for limbs</b></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/LASCO-PVC-Sch-40-Adapter/1067457">¾”male<br />
thread to ¾” slip adapter</a></span></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
4</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$0.41</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$1.64</div>
</td>
</tr>
<tr>
<td style="border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Limbs</b></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/Charlotte-Pipe-3-4-in-x-5-ft-480-PSI-PVC-Pipe/3133087">¾”x5’<br />
SCH40 PVC pipe</a></span></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
2</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$2.30</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$4.60</div>
</td>
</tr>
<tr>
<td style="background: #d9e2f3; border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Clamp limbs in place</b></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/AMERICAN-VALVE-2-Pack-1-5-16-in-to-2-1-4-in-dia-Stainless-Steel-Adjustable-Clamp/1000341877">1-5/16”<br />
to 2-1/4” steel clamp</a></span></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
2 <span style="font-size: x-small;">packs</span></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$2.48/2 pack</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$4.96</div>
</td>
</tr>
<tr>
<td style="border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Top Cap</b></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/LASCO-PVC-Sch-40-Cap/3371576">1.5” SCH40 PVC<br />
Cap</a></span></div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
1</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$1.28</div>
</td>
<td style="border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$1.28</div>
</td>
</tr>
<tr>
<td style="background: #d9e2f3; border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Hold bells in place on limbs</b></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/Danco-10-Pack-1-3-16-in-x-1-8-in-Rubber-Faucet-O-Ring/3369366">#18<br />
O-Rings</a></span></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
2 <span style="font-size: x-small;">packs</span></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$2.49/10 pack</div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$4.98</div>
</td>
</tr>
<tr>
<td style="border-bottom: solid 1.0pt; border-left: solid #8eaadb 1.0pt; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Glue PVC joints</b></div>
</td>
<td style="border-bottom: solid 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<span class="MsoHyperlink"><a href="https://www.lowes.com/pd/Oatey-8-fl-oz-PVC-Cement/4750803">Clear PVC<br />
cement</a></span></div>
</td>
<td style="border-bottom: solid 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
1</div>
</td>
<td style="border-bottom: solid 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$5.40</div>
</td>
<td style="border-bottom: solid 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$5.40</div>
</td>
</tr>
<tr>
<td style="background: #d9e2f3; border-top: none; border: solid #8eaadb 1.0pt; padding: 0in 5.4pt 0in 5.4pt; width: 148.25pt;" valign="top" width="198"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<b>Total</b></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 171.0pt;" valign="top" width="228"><br />
<div class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in;">
<br /></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 31.5pt;" valign="top" width="42"><br />
<div align="center" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: center;">
<br /></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 67.35pt;" valign="top" width="90"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
<br /></div>
</td>
<td style="background: #d9e2f3; border-bottom: solid #8eaadb 1.0pt; border-left: none; border-right: solid #8eaadb 1.0pt; border-top: none; padding: 0in 5.4pt 0in 5.4pt; width: 49.4pt;" valign="top" width="66"><br />
<div align="right" class="MsoNormal" style="line-height: normal; margin-bottom: 0.0001pt; margin-bottom: 0in; text-align: right;">
$68.57</div>
</td>
</tr>
</tbody></table>
<br />
<div class="MsoNormal">
I receive no compensation for promoting any of these items or the store at which I purchased them. This is just what I used and where I got them.</div>
<div class="MsoNormal">
<br /></div>
<div class="MsoNormal">
Note that I am not including the components for dying the PVC, as I still haven't figured out how to get that to work (though people do seem to actually love the strange mottled blue I ended up with). I have a bottle of solvent-soluble dye on my workbench right now, so I'll be testing it out over the weekend and will update this if I get it to work.</div>
<div class="MsoNormal">
<br /></div>
<div class="MsoNormal">
Here is a list of the tools you will need to complete the project, roughly in the order that they are used:</div>
<div class="MsoNormal">
</div>
<ul>
<li>Tape measure</li>
<li>Circular saw (optional: to rough cut the base from a large sheet of OSB or plywood)</li>
<li>Straight edge (optional: if you rough cut a square base)</li>
<li>Pencil</li>
<li>Wood screw (for center of circle - this is removed once circle is drawn)</li>
<li>String </li>
<li>Jigsaw with ~10TPI blade suitable for OSB or plywood</li>
<li>Palm sander with ~80 grit sandpaper</li>
<li>Drill</li>
<li>1/4" drill bit</li>
<li>Countersink drill bit</li>
<li>Vice</li>
<li>Hack saw</li>
<li>File (preferably a "half-round" file)</li>
<li>Pipe/Tubing cutter with at least 1.5" tubing capacity (optional - can use hacksaw)</li>
</ul>
<br />
Good luck.</div>
CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-76456453056427324102018-11-14T09:41:00.000-07:002018-11-14T10:50:21.000-07:00CherkyB Reads CherkyB: The Saga of the Handbell TreeI've gotta tell you, I kind of enjoy figuring out how to do dumb things with a video editor. Which gave me the inspiration for my latest recurring feature: CherkyB Reads CherkyB. That, and it's not clear to me that people get the full effect of my written word if they don't know me well enough to picture me telling the story. This way, it's almost like you're sitting at happy hour with me, and you've said some innocuous thing like, "So, how was your weekend?" and then you sit back and marvel.<br />
<br />
Plus, Tuesdays are one of my healthy days, so I don't drink, so I couldn't write a blog. No rule says I can't vlog sober, though.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<iframe allowfullscreen="" class="YOUTUBE-iframe-video" data-thumbnail-src="https://i.ytimg.com/vi/ihmvElKRxWI/0.jpg" frameborder="0" height="266" src="https://www.youtube.com/embed/ihmvElKRxWI?feature=player_embedded" width="320"></iframe></div>
<br />
<br />
<br />CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-37852929061761103042018-11-12T21:11:00.002-07:002018-11-12T21:11:25.170-07:00The Saga of the Handbell TreeThose of you who have followed my blog for roughly 12 years know that I am a man of many talents. Those of you who have come to know me more recently (shout out to Korn Kob) are still trying to process all the many levels of my talent and are mostly still just sitting back in shocked awe. But let me let you in on a little-known aspect of my persona.<br />
<br />
I play in a handbell choir.<br />
<br />
That's right. You can try to close your slacked jaw now. Maybe see if you can get the drooling under control. <br />
<br />
Oh? That's just how you are most of the time? I feel like I would have remembered something like that. But we can play pretend if it makes you more comfortable.<br />
<br />
It all started innocently enough. The Mrs. decided to check out the local franchise of her favorite church chain, oh, something like 11 years after we moved here. One can guess at the impetus for that appearing out of the blue, but that's not really the point of my narrative. The point is that said church had a handbell choir.<br />
<br />
The Mrs., of course, is a conservatory-trained musician. Thus, she is uniquely susceptible to anything music-related. <br />
<br />
Not sharing in that particular foible, I liken it to this: Imagine, if you will, that you decide to drop by your local church one Sunday, just to check it out. As luck would have it, the prime rib choir is performing that day. They are performing a prime rib eating exhibition during the intro, and another during the offering. Upon further inquiry, you are informed that they meet every Sunday for an hour to practice cooking and eating prime rib, and then four or five times a year, they put on an exhibition for the congregation where they eat prime rib up there on the dais while the congregation looks on in awe and applauds.<br />
<br />
And, they are looking for more members for the Prime Rib Choir. <br />
<br />
You'd be all over that. "Sign me the F- up!"<br />
<br />
This is what music is like to a musician. It's never, "Oh, prime riiiib. I really only do NY Strip. Not for me, bruh. Not for me." It's more like, "Well, I play viola, and violin, and piano, and bagpipes, and a little ukulele. How hard can handbells be? Sign me the F- up!"<br />
<br />
And thus, my wife became a member of the local church's handbell choir.<br />
<br />
But does it stop there? No. Of course not. No one's wife signs up for something and then just keeps it to herself. Because in her mind, she's just signed up for Prime Rib Choir, and what kind of jerk wife wouldn't want to share that with her loving husband and children?<br />
<br />
So now, The Mrs., HannahC, and I are all in a handbell choir. My inability to ever not do whatever is necessary to please my wife shall be left for other threads. I am, shall we say, the best husband anyone could ever imagine. Really. Ask around. You'll see. I.am.the.best.<br />
<br />
Not content, however, with just eating prime rib on Sundays, The Mrs. auditioned for another prime rib, errr, I mean handbell choir. And, owing to her intense musical talent or obsession or what-have-you, she got in to that, too.<br />
<br />
I start a lot of sentences with conjunctions on this blog. I always have. Feel free to stop reading if that bothers you, but be aware that I know I am doing it, and I don't give a flying <> at a rolling donut that it is considered "wrong". When I get my book deal, I can clean all that up.<br />
<br />
Now, fast forward to last weekend. Innocently enough, The Mrs. says, "I need you to make me a bell tree."<br />
<br />
OK, like any normal, red-blooded American man, I have no idea what that is. <br />
<br />
But, if you Google(R) it, you find stuff like <a href="https://www.youtube.com/watch?v=thdKRZoGKB0" target="_blank">this</a>. The lady on the left is using a bell tree. Now, I've learned that "bell tree" is somewhat non-specific in that most of your hits will be to little Christmas trees that are constructed of sleigh bells. So, I mostly try to say "handbell tree" now.<br />
<br />
The design was largely left up to me, though the following requirements were specified:<br />
<br />
<ul>
<li>It had to have four horizontal "branches" from which to hang the handbells</li>
<li>Each of the branches had to be individually adjustable for height and radial angle</li>
<li>It had to cost a lot less than a commercial one ($350-$550, depending upon model)</li>
<li>It could not be white</li>
</ul>
<div>
Your ten minute design window begins...now.</div>
<div>
<br /></div>
<div>
I spent a good deal of time pondering this challenge and executing the first iteration of the design. Not as much time as I spent editing the video of it, mind you, but still a good deal of time. I knocked out the first attempt this weekend, and I am in the process of preparing a "serious" post about it that includes lists of material and tools and such. In the mean time, I'll put a link to the YouTube video of it <a href="https://www.youtube.com/watch?v=wJr-Hu1wrgQ" target="_blank">here</a>. The real multi-media experience post with embedded video, photos, and instructions is still WIP. In the end, it'll look like this:</div>
<div>
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="https://4.bp.blogspot.com/-p-ac5OynrS8/W-pOwXw2xdI/AAAAAAAAMzU/O6_Fm8yil-c6bsMGTjKmw6_aRCpGhMqywCLcBGAs/s1600/IMG_20181111_140725782.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" data-original-height="1600" data-original-width="1200" height="320" src="https://4.bp.blogspot.com/-p-ac5OynrS8/W-pOwXw2xdI/AAAAAAAAMzU/O6_Fm8yil-c6bsMGTjKmw6_aRCpGhMqywCLcBGAs/s320/IMG_20181111_140725782.jpg" width="240" /></a></div>
<div>
<br /></div>
<div>
<br /></div>
<div>
I hope to finish the post soon.</div>
CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com1tag:blogger.com,1999:blog-24442373.post-57646136753073658772018-11-11T22:09:00.001-07:002018-11-12T07:35:42.624-07:00A Quiet Return<blockquote class="tr_bq">
<span style="background-color: white; color: #181818; font-family: "merriweather" , "georgia" , serif; font-size: 14px;">Because we cannot repair the loss of years away, homecomings are almost always conflicted. We are no longer at "home" in our former familiar place. And we do not live between two or more cultures, but rather in both. We are neither fully away, nor fully home. </span><br />
-- Charles Ringma</blockquote>
The entire blogger interface has changed. I'm not sure what to make of that, but it sure doesn't feel like home.<br />
<br />
Like many former bloggers, I fell under the spell of Facebook, with its simple-to-use interface that did not require you to sit for an hour or more each night composing a masterpiece or (in that case of weather observations), shooting 5 minutes of video, then spending an hour editing and mixing and rendering it. I slowly stopped blogging. But, of course, FB has now run its course and devolved into a platform designed to divide us and rile us up and to spread really, really old memes. Ones that were already old before they showed up on iFunny months before making it to FB. But I digress...<br />
<br />
Because I became quite enamored with video back in the day of "CherkyB, Weather or Not," I'll be staring out with some posts that also include video. I've taken up the hobby of tobacco pipe carving, so I'm sure I'll have a few on that (I've made four pipes so far, and three more blocks of briar burl were delivered today). Right now, I am uploading a video on how to (kinda) make a handbell tree. The Mrs. plays in a couple handbell choirs and asked me to make one for her, which I did with somewhat limited success. It's a 27 minute-long video that took me hours to splice together. I had to beg time off MaxieC to use his 22-core Xeon(tm) processor server to render it, as it was going to take around 50 hours to render on my 2-core laptop. It will take around an hour just to upload that video to Youtube.<br />
<br />
It's not clear to me that this blog will ever return to its glory days. I'm just not that funny anymore, it seems. I'm not sure why. I assume it's due to having my magazines limited to 15 rounds. I'm gong to give it a shot, though. I could use a little catharsis. And, of course, I plan to follow the old rule: never blog sober. L'Chaim.CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com3tag:blogger.com,1999:blog-24442373.post-75550025705405224402017-03-19T10:43:00.000-06:002017-03-19T10:43:44.008-06:00Traitor Joe'sI gotta tell you folks, I was pretty happy to be rid of Trader Joe's when we left San Schmose for Ft. TomCollins eleven years ago. But as more and more radical lefties moved into town, the clambering for a Trader Joe's got to be too much, and the f'ers built one.<br />
<br />
Ugh.<br />
<br />
I don't understand the the draw. I get that it is almost entirely virtue signaling, like a Whole Foods, or driving a Prius, or pretending that you actually think Hillary would have been anything other than an incompetent yet remarkably corrupt president, but really...why?<br />
<br />
What can actually be accomplished by shopping at a Trader Joe's? You can't really make a meal from the food there, as they have sort of a random collection of bizarre things that only loosely resemble food. Or, perhaps, are derived from food, but some chef had a fever dream of making an all new flavor by taking perfectly good food and adding something no one else would ever imagine to it. Voila! Crap that upper middle class white womens can prattle on about, but that is an absolute abomination to those who view food as something you'd want to eat rather than just posture about. <br />
<br />
Why, just yesterday MaxieC was watching The Mrs. attempt to stir the Trader Joe's peanut butter into something resembling a spreadable food item - a task that took about ten minutes, as the sign of a "really good peanut butter" is how much it separates in the jar - when this little conversation took place: <br />
<blockquote>
MaxieC: "What is <i>that</i>?"<br />
The Mrs.: "Peanut butter."<br />
MaxieC: "Why doesn't it look like peanut butter?"<br />
The Mrs.: "Because it has flax seeds and other good stuff in it."</blockquote>
Flax seeds...and other...good...stuff.CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-7950683098672854272013-09-26T13:48:00.001-06:002013-09-26T13:48:21.455-06:00The Chronicles of CherkyB: Episode 1 - The Journey East<p dir="ltr">Yes, the fambily is heading on a big junket across the eastern seaboard of these United States. It is sure to be disastrous, but thus far we can only guess as to exactly which iceberg will do us in. </p>
<p dir="ltr">Will it be that, somehow, despite all the promises to the contrary, we have even more luggage with us than we had the last time, and which caused us a great deal of trouble trying to get a larger rental car at the Hartford airport at midnight when it would not fit? </p>
<p dir="ltr">Will it be that three out of the four of us are sick with colds? (I'm the one who is OK. Thank you for your concern.) </p>
<p dir="ltr">Will it be that we miss our connection in Chicago, which happens to be the last flight out tonight? </p>
<p dir="ltr">I don't know. I just know that disaster looms.  These trips always entail disaster. </p>
<p dir="ltr">I've decided to implement a magic word that when said, means we must stop fighting and act happy. I think I can do that, as I am a paragon of self-control. I have not yet broken this news to the fambily - the news of the secret word, not the news of my legendary self-control. That, they know all too well. I have chosen the word, "artichoke." </p>
<p dir="ltr">I hope we don't happen to have stumbled upon the artichoke festival. </p>
<p dir="ltr">We're sitting in the truck right now, waiting for HannahC to get out of school. We left way early, cuz The Mrs. was out of her mind stir crazy to get going. Been sitting here 20 minutes already. </p>
<p dir="ltr">I'm writing this on my new Droid Maxx. It's hard to blog with no keyboard. Oh, here comes HannahC. </p>
<p dir="ltr">Off to the airport we go. </p>
CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-75050904546292958332013-06-05T10:17:00.001-06:002013-06-05T10:17:42.335-06:00Why, I neverThis past Saturday, we decided to take the day off from yard work and, "go do something fun."<br />
<br />
What this means is that I spend most of the day driving while The Mrs. alternates between snoozing in the passenger seat and fiddling with all the HVAC controls to set the to the exact opposite of whatever I set them to, HannahC sits in the back listening to One Direction on her iPod, and MaxieC listens to mp3's of books on his iPod, whining about how we're not there yet and asking how long it will be until we get there, then "fact-checking" the response vs. the "time remaining to destination" he can read off the GPS nav screen. He has not accepted any concept of rounding to the nearest quarter-hour, nor the idea that if you can read the answer off the nav, there is no need to ask me the question in the first place. I suspect he mostly just enjoys being annoying.<br />
<br />
I have no idea which side of the fambly he gets that from.<br />
<br />
We decided to take a run up to Breckenridge Brewery, as they brew the one and only beer that The Mrs. will drink anymore: <a href="http://www.breckbrew.com/brews/vanilla-porter" target="_blank">Breckenridge Vanilla Porter</a>. We'd never been to Breckenridge, being that it's a ski town and none of us ski, but it's right outside of Frisco, a place the Mrs. likes and had suggested as a possible destination to, "go do something fun." Plus, The Mrs. has been threatening to take me camping near Frisco and renting a pontoon boat from the marina to go fishing all day on Fathers' Day, so I wanted to check out the reservoir (Dillon Reservoir) and the boat rental situation ahead of time.<br />
<br />
Good thing we did that. The water level is very low, and none of the floating docks are in. The water is about 1/4 mile from where the rental dock should be.<br />
<br />
We went up to Breckenridge and found the brewery pretty easily. Well, we found the brew pub. I'm not convinced the bottling operation is anywhere near that, cuz the building is just brew pub-sized. Whatever. The food was decent, and I ordered a Vanilla Porter (cuz they are fantastic), and The Mrs. ordered...<br />
<br />
A Coke.<br />
<br />
This angered HannahC, as we had just driven two hours to go to the home of her one and only favorite beer, and she didn't order any of it. The excuse given was, "I don't want to drink at this altitude." This is thin gruel, as the original discovery of Breck Vanilla Porter was at a little pub in Estes Park, where they had it on tap. The elevation there is 7522 ft. This was a mere 2000 ft higher. But, whatever. She just gulped down a whole bunch of mine, so she didn't have to count it as "drinking".<br />
<br />
Other than lunch, Breckenridge was a total bust. There's really absolutely nothing there in the town but ski shops and bars and t-shirt shops. As The Mrs. kept saying, "This is nothing like Aspen."<br />
<br />
I've never been to Aspen, given that I'm neither fabulously rich nor a raging leftists, but The Mrs. used to go there every summer for some music thing.<br />
<br />
The Mrs. had found some open space preserve just outside of town that we were going to visit. Supposedly, it had a lot of wildlife and sometimes even moose. After lunch and a stroll through town, we set off looking for it. We had its GPS location, but the street location given for it on the website was in the middle of town. We drove completely around the periphery of where it was located on the map (which took about 20 minutes), and could find no entrance. So, we went to the local gas station, and I topped off the old tank with about 20 gallons, and the rest of the fambly went inside to buy every snack food they sold and ask for directions.<br />
<br />
The directions were, "I dunno. I've never heard of it. Drive up to Peak 8 and ask at the lodge."<br />
<br />
So we drove back up the mountain along the road that bordered the open space (theoretically), only this time we went down every little dead-end side street along the way, still finding no sign of this place. Finally, we ended up at the top of Peak 8 and found something that looked like a lodge but was actually a pricey condo resort, and the Mrs. went inside to ask for directions.<br />
<br />
"It closed last year. Doesn't exist anymore."<br />
<br />
Grrr...<br />
<br />
However, that's not the point of my story. The point is that on the way home, I was driving along I-70 between the Johnson Tunnel and Denver along the section with the very long run of 4-6% downgrade slope, and there were signs that said, "Truckers make sure your brakes are working and adjusted," and The Mrs. asked me, "what does it mean that your brakes are 'adjusted'?"<br />
<br />
Not being a big-rig driver myself, I went with what I knew.<br />
<blockquote class="tr_bq">
Me, CherkyB: "Well, when you are pulling a trailer, you have to adjust the brake gain on the trailer vs. on the tractor based on how heavy the thing you are towing is and how good its brakes are. You want them balanced so all your wheels brake evenly. You see here, I have this thing right here to adjust that," and I point to my integrated trailer brake controller.</blockquote>
<blockquote class="tr_bq">
The Mrs.: [looking somewhat confused] "You mean, you can tow stuff with this truck?"</blockquote>
<blockquote class="tr_bq">
Me, CherkyB: "Yes, of course."</blockquote>
<blockquote class="tr_bq">
The Mrs.: "So, like, if we bought a boat or a camper, you could tow it with this truck? You won't need to buy a different truck?"</blockquote>
<blockquote class="tr_bq">
Me, CherkyB: "Yes. I can't pull one of those 30 ft 5th wheel trailers like [our next door neighbor] has, but I can pull anything we would ever buy."</blockquote>
<blockquote class="tr_bq">
The Mrs.: "Wow. I had no idea."</blockquote>
Why, I never.<br />
<blockquote class="tr_bq">
</blockquote>
<blockquote class="tr_bq">
</blockquote>
<blockquote class="tr_bq">
</blockquote>
<blockquote class="tr_bq">
</blockquote>
<br />
<br />
<br />
<br />
<br />
<br />CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com1tag:blogger.com,1999:blog-24442373.post-10461306215289786192013-02-19T22:29:00.002-07:002013-02-19T22:30:18.492-07:00Is it just me...or does everyone else snicker when they read the word, "proteins?"<br />
<div>
<br /></div>
<div>
This is apparently a new menu term. I saw it multiple times today, and I can't remember ever seeing it before. First was at lunch, at a local Thai restaurant, where the lunch specials came with "Your choice of Proteins chicken, beef, pork, tofu." (One doesn't expect perfect punctuation on the menu of a Thai restaurant. In fact, I think it's actually required to include a bunch of errors in order to be "authentic." The restaurant equivalent of "keeping it real.")</div>
<div>
<br /></div>
<div>
Then, when I got back to work, I read the flyer for the new, improved cafeteria menu, and the salad bar description said, "Crisp greens and hot Proteins". And the next menu item also described Proteins.</div>
<div>
<br /></div>
<div>
Yeah - "Proteins" needs to be capitalized, I guess.</div>
<div>
<br /></div>
<div>
Still, though, whenever I read "Proteins," I think <a href="http://www.blisstree.com/2013/02/19/food/what-is-semen-made-of/">this</a>. It makes me not want to eat there.<br />
<div>
<br /></div>
<div>
<br /></div>
</div>
CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-54722253564810909852013-02-16T22:45:00.001-07:002013-02-16T22:45:22.870-07:00Smart Cars<div class="tr_bq">
Those two or three of you who still read this blog know that I am a very, very humble man. But, sometimes I just have to brag a bit about The Childrens. Probably as a way to let everyone know what a wonderful, successful parent I am.</div>
<br />
This is one of those times.<br />
<br />
What follows is a completely true story that took place Monday. We were sitting at a traffic light, and a Smart Car was sitting at the light on the intersecting street. It had a complete vehicle wrap advertising a local shoppe, and on the front had either a nose or a bow tie. I couldn't really see it that well cuz it was facing perpendicular to me. But I made note to MaxieC:<br />
<br />
<blockquote>
Me, CherkyB: "Look! A clown car!"<br />
<br />MaxieC: "Daaaah. That's not a clown car. That's a Smart Car."<br /><br />MaxieC: "In fact, it's not really a Smart Car. It's more like a stupid car. You can't even fit any dead hookers in it."<br /><br />Me, CherkyB: "Heh heh....wait...What did you say?"<br /><br />MaxieC: "I said it was a stupid car."<br /><br />Me, CherkyB: "No. After that."<br /><br />MaxieC: "I...uhhhh...I said...uhhh...you can't even fit your groceries in it."
</blockquote>
That's my boy.CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-86441712891915155972012-12-09T22:05:00.002-07:002012-12-09T22:05:56.328-07:00What a RipWith heavy heart, I began to dismantle the old entertainment center this morning. I got most of the "removable" parts off, and then I started trying to remove the glued in parts. The entire top, with shelf, came off surprisingly easily, being held in with just a few screws and gravity.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-aNqLedT1bhE/UMVppIynWOI/AAAAAAAAAB4/OMl5j6U3f1M/s1600/8257940895_52a8c2b382_b.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://4.bp.blogspot.com/-aNqLedT1bhE/UMVppIynWOI/AAAAAAAAAB4/OMl5j6U3f1M/s320/8257940895_52a8c2b382_b.jpg" width="180" /></a></div>
<br />
MaxieC worked to dismantle the top while I strategized on the rest of the case. He had a great time using the power drill to remove all the wood screws. Funny thing, though. As we got farther and farther into the dismantling, I found more and more parts that were not solid wood. In fact, it seemed like nearly everything was press board with a very high quality wood laminate on the surface. The only things that turned out to be actually solid wood were the four corner posts and the trim frame around the top. Everything else was fake.<br />
<br />
When I bought this from a name-brand furniture store, it was sold to me as solid wood. But the whole damn thing is fake. Very high quality fake, mind you, but still fake. What a rip.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://3.bp.blogspot.com/-bckJbm8vgf4/UMVpp8u0esI/AAAAAAAAACA/4Ap3Wp_cfto/s1600/8259004606_743da98357_b.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://3.bp.blogspot.com/-bckJbm8vgf4/UMVpp8u0esI/AAAAAAAAACA/4Ap3Wp_cfto/s320/8259004606_743da98357_b.jpg" width="320" /></a></div>
<br />
Well, when the entire purpose of carefully disassembling the piece is premised upon saving the wood, and then you find out that there isn't actually any wood to save, there's a tool specifically designed for that. It's made by Milwaukee, and if you load it up with a blade called "<a href="http://www.milwaukeetool.com/sawzallreciprocating-saws/sawzall-blades/wood-cutting-sawzall-blades/the-ax-demolition-blades/6-inch-5-tpi-the-ax-sawzall-blade-(5-pk)/48-00-5021">The Ax</a>" that is designed for demolition, well, hell, things get fun real fast.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-2VmsST7sDNI/UMVpqrL39gI/AAAAAAAAACI/hEF2THJI2fE/s1600/8259126204_6e08816cb4_b.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://4.bp.blogspot.com/-2VmsST7sDNI/UMVpqrL39gI/AAAAAAAAACI/hEF2THJI2fE/s320/8259126204_6e08816cb4_b.jpg" width="180" /></a></div>
<br />
MaxieC tried to bash it all up with a dead blow hammer, but achieved only limited success. I suggested he get the 12 lbs. sledge, but he didn't want to. You can lead a horse to water...
<br />
<br />
We then spent about an hour putting together the new, much much cheaper entertainment stand that will hold whatever goodies we get this Christmas. It says the top can hold 200 lbs., but is not allowed to hold a tube TV . Odd, as my tube TV doesn't weigh anything near 200 lbs. The corner TV mount arrives via UPS on Tuesday. Once I get that up on the wall, I'll probably have to decide on which TV Santa will bring.<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-IxSuh-IX1e0/UMVprboJAzI/AAAAAAAAACQ/6iPVbEcUicg/s1600/8259370599_6d885dd332_b.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="180" src="http://2.bp.blogspot.com/-IxSuh-IX1e0/UMVprboJAzI/AAAAAAAAACQ/6iPVbEcUicg/s320/8259370599_6d885dd332_b.jpg" width="320" /></a></div>
<br />CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-25024694355748626332012-12-09T00:34:00.001-07:002012-12-09T00:34:23.818-07:00Obsolescence, Get to Know ItThere is nothing sadder than obsolescence. Well, other than maybe friends and family dying. Or a pet dying. Or The Bills going to four Superbowls in a row and losing all of them. Or, perhaps, one of your single friends telling you he's getting married. Or having to sit through any of The Twilight movies after the first one. Or going to the garage refrigerator only to remember you've run out of beer. And then realizing you're also out of bourbon, too.<br />
<br />
There are many things sadder than obsolescence, but still, in the greater scheme of things, obsolescence is sad. Though in a good way, because it only happens when something better comes along. Like how nobody eats a Whopper anymore since the Whopper with Cheese came along.<br />
<br />
Hmmm.<br />
<br />
Obsolescence is one of side effects of the great march of progress called "Creative Destruction" that happens largely in capitalistic societies where people are continuously striving for improvement. Both incremental improvement and revolutionary improvement. Creative Destruction is one of the best things ever to happen to society, and it has liberated more people from poverty than any Live Aid concert could ever hope to.<br />
<br />
Still, it's sad when it happens to you.<br />
<br />
For instance, when you bought a beautiful oak and cherry entertainment center that could hold an outrageously large 32" TV. And you bought high quality furniture, because you didn't want any of that screw-together particle board crap. No, you wanted something that was going to last and last. And you took it from your first house to your second, then to your third. And in the third house, it kinda ended up in the rec room in the basement, cuz there was a built-in nook in the family room that would hold a 43" DLP widescreen TV just fine.<br />
<br />
<br />
<div class="separator" style="clear: both; text-align: center;">
<a href="http://2.bp.blogspot.com/-ckusa84jJbQ/UMQ3GsCdLEI/AAAAAAAAABY/pd6tAvWmkxg/s1600/8226453078_fa8b77dd94_k.jpg" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="400" src="http://2.bp.blogspot.com/-ckusa84jJbQ/UMQ3GsCdLEI/AAAAAAAAABY/pd6tAvWmkxg/s400/8226453078_fa8b77dd94_k.jpg" width="225" /></a></div>
<br />
<br />
And then one day, out of the blue, your son says, "I want an Xbox 360 for Christmas."<br />
<div>
<br /></div>
<div>
Well, the Xbox 360 is a fine piece of machinery, but tailored more for older children. Ones who have graduated from high school and are still living in the basement. We're a PlayStation household, having owned the original and then two of the PS2's. And the PS3 plays Blu Ray, a big cost saver right there.</div>
<div>
<br /></div>
<div>
"OK, I want a PS3 for Christmas."</div>
<div>
<br /></div>
<div>
Well, son, the PS3 really wants to be run with an HDMI output onto a widescreen TV, and the rec room TV is a 14-year old analog tube TV, and it doesn't have any HDMI inputs at all. Now, the surround sound system I have down there has 4 HDMI inputs, cuz when my old stereo reciever (though I bought with money I earned drying cars at a carwash between high school and college) died, I got it anticipating that one day we'd probably get a new TV and game system, but it can't convert HDMI inputs to analog outputs for DRM reasons..</div>
<div>
<br /></div>
<div>
"Yeah, OK Da. We'll just get a new TV, too. That'll be great! Should we go shopping right now?"</div>
<div>
<br /></div>
<div>
You know the thing about a 32" tube TV with a beautiful oak and cherry cabinet? There's not one goddamn person in northern Colorado who wants one badly enough to carry it out of the basement of someone else's house.</div>
<div>
<br /></div>
<div>
Another sad thing is that I'm old now. It just happened kind of all of a sudden. This blog used to be about all the fun little fix-it jobs I used to do and the wacky hijinx that ensued, but I have really slowed down a lot in the last couple years. I hardly do anything. And the thought of trying to lug this giant entertainment cabinet up the curvy stairs from the basement is itself awfully tiring.</div>
<div>
<br /></div>
<div>
Yes, I lined up three other guys to help, but still, I am struck with the futility of this. There are a couple donation places that will take the furniture (but not the TV), and only if I put it in the driveway for them so they don't have to carry it out of the basement, but who will really want this? No one. Even poor people don't have tube TVs anymore, and the cabinet is useless for anything else.</div>
<div>
<br /></div>
<div>
So, I've decided to do something drastic. I'm going to dismantle it and try to get as much good lumber out of it as possible. It's a damn shame, as the tracks for the sliding doors that cover the TV are works of art just by themselves. Time stands still for no one, though. I need to take Ol' Yeller out in the woods and shoot him. </div>
<div>
<br /></div>
<div class="separator" style="clear: both; text-align: center;">
<a href="http://4.bp.blogspot.com/-fmNrc9mmeqw/UMQ9te7taHI/AAAAAAAAABo/_GvX95hP8FQ/s1600/8257258464_15837827ed_k.png" imageanchor="1" style="margin-left: 1em; margin-right: 1em;"><img border="0" height="320" src="http://4.bp.blogspot.com/-fmNrc9mmeqw/UMQ9te7taHI/AAAAAAAAABo/_GvX95hP8FQ/s320/8257258464_15837827ed_k.png" width="213" /></a></div>
<div>
<br /></div>
<div>
I toyed for a while with the idea of cutting the top off and saving the bottom cabinet, but I'm not sure what I would do with it. Who needs a cabinet with sliding drawers that have inserts to hold VHS tapes? No. It's a goner. I'll try to be gentle, as gentle as one can be with a Sawzall...</div>
CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-64064956649434762802012-12-08T23:51:00.001-07:002012-12-08T23:52:37.902-07:00For the Humor ImpairedIt has come to my attention that I may have overestimated the intelligence of my audience. I try to never do that. When I write my posts, I try to picture myself with a blank stare, the only light glinting off a bit of drool escaping from the corner of my mouth, the rest of me with the dull patina of dirt and stupidity. Oh wait, no, I channeling <a href="http://www.amazon.com/Sacre-Bleu-Comedy-dArt-P-S/dp/006177975X/ref=sr_1_1?ie=UTF8&qid=1355035539&sr=8-1&keywords=christopher+moore+sacre+bleu">Christopher Moore</a>.<br />
<br />
But today, someone said to me, in the standard, hyper-critical way, "You know <a href="http://cherkyb.blogspot.com/2012/12/santary-products.html">you spelled 'sanitary' wrong</a>."<br />
<br />
I blinked a bit to see if it was a joke, cuz I'm never really sure when humor will appear in an otherwise barren landscape, but it was not. It was a serious statement.<br />
<br />
So I said, "I did that intentionally cuz it was about Santa. Santa-ry. That's what makes it funny."<br />
<br />
"Ooooohhhh. Santa. I get it now. No one is going to get that."<br />
<br />
[Sigh] Maybe I'll just go back to shooting videos about the weather and setting them to Yakety Sax.<br />
<br />
<br />CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-34341560562729689412012-12-06T16:05:00.002-07:002012-12-08T23:58:17.444-07:00Santary ProductsMaxieC still believes in Santa. This is probably not ideal, but here at the CherkyB household, I have surprisingly little input into such decisions. I know, I know, you're shocked, Shocked! that this could be the case, but there it is.<br />
<br />
HannahC is still mad at us, not for having ever led her to believe in Santa, mind you. No, she is angry that we only were able to keep up the ruse until she was 10. She believes we have cheated her out of a "magical Christmas" now that she knows the real deal. And she has dedicated herself to making sure MaxieC doesn't find out.<br />
<br />
Bless her heart.<br />
<br />
Well, round about this time of year, purely by coincidence, a lot of little packages from Amazon seem to get left on the front porch. The Mrs. dutifully brings these in and, if they are things she has ordered, she squirrels them away unnoticed. However, if they happen to be addressed to me, she leaves them just inside the front door and announces their presence the moment I walk in from work.<br />
<br />
Cuz, you know, I work.<br />
<br />
Imagine,if you will, the excitement of a little boy who has just been reminded that there are unopened packages at the front door and that the person who owns those packages is now around. There is jumping up and down. There is hanging on my arm. There is shoving of said packages into my face.<br />
<br />
What there distinctly is not is any way to squirrel away the packages unnoticed.<br />
<br />
However, I am a resourceful man:<br />
<blockquote class="tr_bq">
MaxieC: "Daddy! Daddy! Open the package! Open it!"<br />
<br />
Me, CherkyB: "No."<br />
<br />
MaxieC: "What is it? Open it! Open it!<br />
<br />
Me, CherkyB: "No. I have to take this upstairs."<br />
<br />
MaxieC: "Why? What is it? Why won't you open it? What is it? What is it?"<br />
<br />
Me, CherkyB: "Your mother has discovered that tampons are really cheap from Amazon. Why don't you open this up and put it under the sink in the master bath upstairs?"<br />
<br />
MaxieC [running away]: "Ewwww!!! Yuuuck!!!!"</blockquote>
<br />
<br />CherkyBhttp://www.blogger.com/profile/13028204239734738409noreply@blogger.com2tag:blogger.com,1999:blog-24442373.post-87918380038578384722012-06-29T20:54:00.001-06:002012-06-29T20:54:20.635-06:00Cloudy with Salt<div><p><a href="https://www.youtube.com/watch?v=GitSb0rdp5g&feature=youtube_gdata_player">Watch "Cloudy with Salt" on YouTube</a><br>
</p>
</div>CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-51033712251702284172012-06-24T21:29:00.001-06:002012-06-24T21:29:51.701-06:00<div><p><a href="https://www.youtube.com/watch?v=kYP3_bSEyVQ&feature=youtube_gdata_player">Watch "Lightning but no rain" on YouTube</a><br>
</p>
</div>CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-37117289535512527112012-01-20T22:19:00.006-07:002012-01-20T23:05:45.966-07:00Advice from a StrangerI was sitting in the Sacramento airport in the A-terminal bar last week, having a bit of lunch while waiting for my flight home. You know, and maybe a beers. Hard to say for sure. Well, a feller sits down next to me and begins to talk to me.<br /><br />Now, as you all know, I'm not a very friendly person. It's not that I don't like people. I'm just absolutely terrible at chit chat. I watch a little football, but I don't memorize any of the games. Other than that, I don't really follow sports. I follow politics, but I don't make chit chat about it with strangers (or, for that matter, with fambly anymore given how much of my fambly is raging leftists or, at the very least, buys into the popularly-held misconception that liberals are smarter than conservatives, or that conservatism is just thinly veiled racism, or both). While I am an astute <a href="http://cherkybackup.blogspot.com/">follower of the weather</a>, one runs out of weather observations rather rapidly. So mainly I smile and nod and pay close attention to see not so much if I can learn about the subject being discussed as I can learn about how to make idle chit chat without feeling like it's completely forced.<br /><br />At this I am a failure.<br /><br />But after a beers or two, I can nod and smile very convincingly, and I can inject wry little witticisms into the conversation for color. Like this:<br /><blockquote>"That's great. And I thought the best thing that could happen today was that <a href="http://www.cabelas.com/product/Home/Misc-Shooting/Ammo-Sale%7C/pc/105625080/c/106032780/sc/106035480/American-Eagle174-Rifle-Ammunition/734598.uts?destination=%2Fcatalog%2Fbrowse%2F_%2FN-1103770#productChart">.223 ammo went on sale at Cabela's</a>, and if you order $99 or more of anything and enter the promo code "<a href="http://www.cabelas.com/custserv/custserv.jsp?pageName=ShippingCode12FREE">12FREE</a>" on the checkout page, you get free shipping this weekend only. And you know how expensive it is to ship ammo. That stuff weighs a ton. It's like they filled the box half up with lead or something."<br /></blockquote>See that - useful information followed up immediately with sarcasm. It's like I have a gift, just not for chit chat.<br /><br />(I'm required to tell you that Cabela's has not paid me any fee or consideration for promoting their sale. I just finished ordering some ammo moments ago, after Slushee text messaged me about the sale, so it was on my mind.)<br /><br />Well, we're chatting some of the standard airport-bar chatter about whether you're going home or leaving home, and whether you're actually from the place you're going to or coming from. Blah blah blah. Then, out of the blue:<br /><blockquote>Guy at Bar: "So, how long have you been married?"<br /><br />Me, CherkyB: "Wait! Don't tell me! I know this one! Uhhh..."<br /><br />Bartender: "You damn well better know this one if you expect to stay married."<br /></blockquote>See, the thing is that I, CherkyB, am a man. Therefore, I remember things the way a man remembers things - I remember when they happened. I don't remember how long it has been since it happened. Somebody says to you, "How long has it been since the Declaration of Independence?" You go, "Hmmm...July 4th, 1776. It's January 2012. 235 and a half years." You don't just <span style="font-style: italic;">know</span> that's how long it has been. And believe you me, the signing of the Declaration of Independence is a hell of a lot more momentous an occasion than any particular person's wedding - yes even more important than Princess Di's.<br /><br />So, I'm doing math in my head. While taking shit from a bartender. Who I guarantee doesn't know how long he's been married, he's just making chit chat.<br /><blockquote>Me, CherkyB: "Oh, a little over 15 years."<br /><br />Guy at Bar: "I made it 18 in mine. Lemme tell you something."<br /><br />Me, CherkyB: "What's that?"<br /><br />Guy at Bar: "Divorce. You should try it. It's like the best thing in the world."<br /><br />Me, CherkyB: "Hmm."<br /><br />Guy at Bar: "Yeah. I thought it was going to be horrible. But it turns out to be fantastic. Fan-f*^king-tastic. You <span style="font-style: italic;">really</span> should try it. If you don't like it, you can always get married again."<br /><br />Me, CherkyB: "Well...I'm not really thinking about getting divorced at the moment."</blockquote>At which point I may have added, "because my darling wife is the best thing that ever happened to me, and we love each other more every day, and she's one of the last people who avidly reads everything I write in my blog," or, "I have kids."<br /><br />One of those.<br /><blockquote>Guy at Bar: "Let me tell you - I was telling my girlfriend how I wanted to quit my job and start my own business, and the next day she had deposited $10,000 into my account to help pay for startup costs. And look at this:"<br /></blockquote>At which point he starts digging in his wallet and tossing credit cards onto the bar.<br /><blockquote>Guy at Bar: "This credit card is hers. This is hers. This one is hers. She pays for everything. You should seriously try divorce."<br /><br />Me, CherkyB: "Well, I'm glad it's working out for you, but I can't imagine being without my dear, beautiful wife who hangs on every word I write on my blog so that she can discuss it with me and/or her mother as though it was some sort of literary masterpiece."<br /><br />Guy at Bar: "Yeah. OK. I'm just saying. Hey, have you seen this online game? It's like a war strategy game where you have armies and have to equip them and fight battles against other players? It's the best. You've got to try it."<br /></blockquote>I bring out the best in people. It's my gift.CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com5tag:blogger.com,1999:blog-24442373.post-39816224125032912502012-01-01T11:15:00.006-07:002012-03-27T11:09:11.168-06:00CherkyB, Father of the YearYes, it's a fresh new year, and this gives us the opportunity to grab the much-coveted Father of the Year trophy, even if just for a brief moment.<br /><br />You see, yesterday for whatever reason, The Mrs. decided she would clean out her closet of all the "old clothes" that she "never wears anymore".<br /><br />All you married people, of course, know that that is code for something that cannot ever be mentioned, not even in a whisper. But the fashion industry exists in large part to create a built-in reason to get rid of old clothes - they're "out of fashion" - so that marriage can exist happily without anyone ever having to mention the unmentionable.<br /><br />She spent hours up there yesterday, and she even vacuumed the walk-in. When I went up there last night, she had wiped out about 90% of her clothes. It was vast expanses of empty hangers and space the likes of which we haven't seen since the moving van arrived the day after we got here.<br /><br />Well, my darling Childrens spent most of that time sitting in the fambly room with me watching the last 6 episodes of Top Shot off the DVR (that we've been saving up for a special occasion) and waiting for the New Year, so they didn't really know the fury that was ongoing upstairs. Fast forward to this morning, where I am blissfully asleep in my nice warm bed when all of a sudden:<br /><blockquote>The Mrs.: [poke poke poke] "Hey, I'm going to see the king."<br /><br />Me, CherkyB: [startled awake] "Huh? What? What king?"<br /><br />The Mrs.: [speaking very slowly, as if to an idiot - which I hesitate to even write here, as this has actually been her normal way of communicating to me since she had childrens and decided I was largely superfluous, though she hasn't figured out how to replace my income yet and is thus filled with resentment] "Iiiiii'mmmmm goooooiiiiiinnnnggg sssshhhhhoooooppppppiiiiinnnnngggg. Alone."<br /><br />Me, CherkyB: [rolling over to go back to sleep] "Great."<br /><br />The Mrs.: "There's pizza in the garage fridge that needs to be eaten."<br /><br />Me, CherkyB: "Bye bye."</blockquote>Later, I got up. I was in the kitchen making my coffee, which is much easier now that we have a Cuisinart machine that does single-serving K-cups. MaxieC asked me where Momma was, and I said, "She moved out." He laughed and went back to watching TV.<br /><br />A few minutes later, after some consideration, this happened:<br /><blockquote>HannahC: "Really, Daddy, where is Momma, and when is she coming back?"<br /><br />Me, CherkyB: "I told you, she moved out. She's not coming back."<br /><br />HannahC: "Oh, come on."<br /><br />Me, CherkyB: "Yeah. She packed up all her stuff and left. She even packed up all her clothes. Have you seen her closet?"<br /><br />[HannahC runs upstairs...checks closet]<br /><br />HannahC: "Daddy! What's going on? Did Momma actually leave?"<br /><br />Me, CherkyB: "No. She packed up all her old clothes to give to the Goodwill, and now she's gone out to buy all new clothes."<br /><br />HannahC: "Daddy!!! You're a jerk!!!"<br /></blockquote>Then she burst into tears and ran into her room. I haven't seen her since.<br /><br />Maybe she moved out.CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com4tag:blogger.com,1999:blog-24442373.post-36250003890183531022011-12-19T21:04:00.002-07:002011-12-19T21:28:22.443-07:00A long, hard winterSo, I'm watching the NFL, as I am wont to do around this time of year, and then one of those things happened which is so cliché that I hesitate to report on it, given how you all will think I'm just spinning a yarn. But here goes:<br /><blockquote>MaxieC: "Dah?"<br /><br />Me, CherkyB: "Yeah?"<br /><br />MaxieC: "What's 'erectile dysfunction'?"<br /></blockquote>A long time ago, I heard on the radio (prolly from Dr. Laura) that the best way to approach uncomfortable questions of children is to answer them matter-of-factly.<br /><blockquote>Me, CherkyB: "Erectile dysfunction means you can't get a boner."<br /><br />MaxieC: "A what?"<br /></blockquote>There are many drawback to being a homeschool parent. The most obvious being that I get to pay taxes to send The Childrens to a public school that they do not attend, and then I get to pay to buy tons and tons of curricula so that my hovering wife, bless her heart, can pick and choose the "best parts" from, say, 5 different math books, because god only knows that there are many ways to teach fractions, but only one of them could possibly be <span style="font-style: italic;">best</span>, and who can tell which will be the best until you've tried them all? And, of course, having a wife who is always angry because she spends every waking hour with the precious little tykes - precious little tykes who have spent their whole lives with their mother and thus know absolutely every possible button to push for maximal annoyance. But, deep down in the list of drawbacks to being a homeschool parent is that your kids just don't pick up all the dirty stuff you normally expect them to learn from their friends.<br /><br />One of which is the definition of "boner".<br /><blockquote>Me, CherkyB: "Well, MaxieC, a 'boner' is when your penis gets hard. Erectile dysfunction is when your penis doesn't get hard."<br /><br />MaxieC: "Why would you want your penis to get hard?"<br /></blockquote>Oh, MaxieC, MaxieC, MaxieC, where to begin?<br /><blockquote>Me, CherkyB: "You remember <a href="http://www.imdb.com/title/tt0368436/">that video with Howie Mandel</a>? The guy from 'Deal or No Deal'?"<br /><br />MaxieC: "Kind of."<br /><br />Me, CherkyB: "You remember how the daddy has to put his penis in the mommy?"<br /><br />MaxieC: "Oh gross!"<br /><br />Me, CherkyB: "Well, your penis needs to be hard to do that."<br /><br />MaxieC: "Yuck!"<br /><br />Me, CherkyB: "And these pills make your penis hard if you have erectile dysfunction. They're called 'boner pills.'"<br /><br />MaxieC: "Stop! Yuck! Gross!</blockquote>Just then, The Mrs. walks in.<br /><blockquote>The Mrs.: "What the heck are you telling him?"<br /><br />Me, CherkyB: "He asked what erectile dysfunction was."<br /><br />The Mrs.: "And you're <span style="font-style:italic;">telling him???</span>"<br /><br />Me, CherkyB: "Yeah - he asked."<br /><br />MaxieC: "I just saw the ad on TV and I asked, but I didn't know what it was, and now I wish I hadn't asked. It's <span style="font-style:italic;">disgusting!</span>"<br /><br />The Mrs.: "Up to your usual standards of parenting again, I see."<br /><br />Me, CherkyB: "He asked. Am I just not supposed to answer?"<br /><br />MaxieC: "I wish you hadn't."<br /></blockquote>I never get any support.CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com5tag:blogger.com,1999:blog-24442373.post-2866328983656616562011-10-26T22:10:00.000-06:002011-10-26T22:11:08.013-06:00I feel like I've neglected youSo I <a href="http://cherkybackup.blogspot.com/2011/10/first-snow-of-season.html">weatherblogged</a>.CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com0tag:blogger.com,1999:blog-24442373.post-76359696503693754342011-07-12T20:37:00.002-06:002011-07-12T21:11:04.118-06:00CherkyB, MoronYes, that's right folks. You heard it here first. Except for those of you who heard the story earlier.<br /><br />It started out innocently enough. My Goombah, Mugsy, asked me to go rifle-shootin' out at the range on account of how he wanted to shoot his new <a href="http://www.armalite.com/ItemForm.aspx?item=30M338&ReturnUrl=Categories.aspx?Category=3a467b6f-2ac9-4e26-82f0-7914a7ffbb4e">AR-30</a> at 200 yds. Well, given that I'm on sabbatical, I couldn't say "no." Plus, I wanted to shoot my new belly gun with the special Speer Gold Dot short-barrel +P personal defense ammo I had picked up for it. <br /><br />Though not at 200 yds. A 3" barrel is not really the right equipment for 200 yds.<br /><br />I decided it'd be fun to shoot my old elk gun that I bought on the spur of the moment when I went to a gun show with a co-worker who wanted to buy a .22 rifle (I ended up buying both a .22 rifle and a .300 Win Mag rifle, and my coworker bought nothing). I had an old friend who had been asking me every year to go elk hunting with him, so I just bought the rifle so's I could go.<br /><br />And the closest we got to an elk was that we had to wait for some to cross the road before we could get to the national forest.<br /><br />But that's another story. One that happened 11 years ago.<br /><br />Now, me being Me, CherkyB, I bought a really nice scope for the rifle - a Leupold Vari-X III of some sort - and I had dutifully gone to the range to zero it in and learn how to shoot a rifle. I had never shot one before, so I bought Jeff Cooper's <a href="http://www.amazon.com/Art-Rifle-Jeff-Cooper/dp/1581605927/ref=sr_1_1?ie=UTF8&qid=1310525509&sr=8-1">The Art of the Rifle</a>, read it, and then tried to put into practice what I learned. This went alright until the night before the hunt, when my buddy's dad tried out my rifle and said, "Your scope is out of focus." <br /><br />And I noticed that, at 100yds, it was slightly out of focus - which it had not been prior to this. I figured despite buying a very pricey flight case for it, United Airlines had knocked something out of whack. But not to worry, as these scopes come with a lifetime warranty. I'd just send it back, and they'd re-align it or whatever.<br /><br />Except I never did. <br /><br />In fact, I'm not at all sure I ever shot that rifle again after the elk hunt until this past Sunday. Now, I kinda have a recollection of shooting it once after the hunt, but I can't really put my finger on when that would have been. I think it's just been in the safe the whole time, with me cleaning and oiling it maybe once every couple years to make sure the bore doesn't rust. <br /><br />So, at one point, Mugsy and I switch rifles, and the AR-30 is one hell of a sweet gun. Virtually no kick, despite being .338 Lapua Mag. As I was looking through his scope, I was thinking to myself, "Self, wow this is a clear image." Then I went back to my gun, looked through the scope, and said, "My scope is out of focus."<br /><br />Mugsy's reply, "Good. Then it isn't just me."<br /><br />Damnit.<br /><br />Well, today I had a little time on my hands, so I looked up the tech support number for Leupold, then I got the scope off the rifle to look for a model number and serial number before calling it in. And then it went like this:<br /><blockquote>Me, CherkyB: "Self, I can't believe that people would make such a fancy scope with fixed focus and no way to adjust it. And now, I'll probably have to find the original receipt to get it fixed, and they'll probably say I damaged it and won't fix it for free."<br /><br />Me, CherkyB: "Hmm...what's this knurled ring next to the zoom? I thought that was part of the zoom, but it doesn't turn when I zoom."<br /><br />Me, CherkyB: "Oh...sweet Jesus."<br /></blockquote>Yeah, that's right. That knurled ring actually was a lock ring for the eyepiece, and when you loosened the ring, the eyepiece could be rotated. Which, yes - you guessed it, adjusted the focus.<br /><br />Duh.CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com5tag:blogger.com,1999:blog-24442373.post-52173482620068498092011-07-06T17:16:00.003-06:002012-03-27T11:19:13.585-06:00Sabbatical 2 - Day 1I think it’s the parenting that will kill me.<br /><br />Not that this is unexpected.<br /><br />As almost none of you know, since I’ve never spoken of it here and only briefly mentioned on that killer-of-blogs, jumper-of-sharks Facebook platform, I am on sabbatical.<br /><br />“What?” you mouth slowly to yourself, in that confused fashion you’d think by now you’d be used to, given the propensity of confusion swirling amidst your life, “I didn’t know CherkyB was an academic. I thought he, like, did stuff.”<br /><br />For once, you’re right. I am not an academic, though “do stuff” is probably more than I’d like to commit to with respects to describing my job. For almost the past two years, I have been able to tell people that I am a “Power Architect.” Then, I get a blank stare and maybe a, “So you have a background in construction?” and I realize that, while being a “power architect” is an excitingly snazzy title compared to my previous one of “binsplit guy”, I’m still not really ready for the cocktail circuit with either of those titles.<br /><br />Not that a proper title would, per se, make me ready for the cocktail circuit, as I can’t for the life of me pretend that socialism is the proper order for a sophisticated society rather than the evolutionary dead-end that it obviously is to anyone whose aspires to more than living off other people’s money. But I digress.<br /><br />I am not an academic. I work for The Company. And one of the perks of working for The Company is that every few years, they give you a couple months off as a “sabbatical”. This has been a long-standing policy of The Company that started back in the days when it was a new and cut-throat industry, and you had no idea which companies would make it and which would not, and so you worked day and night to try to just stay alive. Thus, the danger of burning out was ever-present. Nowadays, it seems we have our act together pretty well and can accomplish substantially more without burning out, yet the sabbatical lives on as a time-tested tradition in much the fashion that we thought having The Company dump a large portion of money into our 401(k) every year was. Right up until they dialed that way back.<br /><br />Today is officially my first day of sabbatical – my second sabbatical – but it comes on the heels of a 4-day weekend. So I’m already on my fifth uninterrupted day of family time, and I’m tired. The Mrs. Decided I should take The Childrens to their swimming lessons today so she could stay home and clean the house. This after I nearly died yesterday after sitting on the floor of the living room, which was the only clear space in the whole house, to go over the Colorado Big Game hunting regulations handbook with HannahC and was overcome with dust allergies that caused me to sneeze and cough and my eyes to water for about three hours until I could find the Benedryl (it was in with the dog’s medicines, of course). Apparently, that particular carpet has not been vacuumed since we took the Christmas tree down in January.<br /><br />I used to vacuum a lot, but I have a rule that I won’t vacuum any room where I can’t see the floor. So now I don’t really ever vacuum. The Mrs. actually moves the vacuum around from room to room so that it’s in a different place every day when I come home from work, but she’s recently admitted that she never actually turns it on cuz she can’t vacuum a room where we can’t see the floor. She puts it in a room as a reminder to herself that she’d like to vacuum that room as soon as The Childrens pick up all their junk, but then she makes HannahC work on 4H projects all day long and makes MaxieC watch TV and play Playstation all day to keep him quiet so HannahC can work on 4H, and, well, not much progress is made on the floor thing.<br /><br />I’ve only managed to go fishing once so far. I caught a single Bluegill. HannahC caught about 11, of which 6 were big enough to eat. It was one of those days where every time I went to put my line back in the water, HannahC would come romping up with another fish for me to clean, so I didn’t get to fish much during the peak catching time. We were there for about 2.5 hours and caught all the keepers in a span of about 20 minutes about 45 minutes after we got there. Then, nothing.<br /><br />HannahC was using new high-technology bait - worms that have been fed something that makes them fluorescent green. Now, I don’t know if they are the glow-in-the-dark worms that I’ve seen at Sportsman’s Warehouse. We’ve been meaning to check each night, but always forget. These were from Walmart, and they cost about double what non-fluorescent green worms cost (which means they’re $3 for 12 instead of $3 for 24), but they’re big crawlers that you can cut in half before baiting a hook. I’m not at this point willing to declare that the fishies love the green worms more than regular worms, but they sure love them more than a Mepps Aglia gold spinner with a Berkeley Gulp Alive minnow trailing on the feather-dressed treble, which is what I was fishing. Scientifically formulated attractant that fish can’t resist, my ass.<br /><br /><blockquote>Lure Researcher: “I’ve come up with a breakthrough formula of pheromones and long-lasting scents that promises to be the most powerful attractant the fishing world has ever known!”<br /><br />Boss: “Do fish like it better than worms?”<br /><br />Lure Researcher: “And I’ve slightly changed the formula of our slow-selling plastic swimbaits so that they can absorb the stank and stink for hours.”<br /><br />Boss: “How does it do versus worms?”<br /><br />Lure Researcher: “And we can sell them packed in little jars with extra liquid so that you can re-charge the swimbaits after you use them.”<br /><br />Boss: “But does it work better than worms?”<br /><br />Lure Researcher: “Well, like regular worms?”<br /><br />Boss: “Yeah”<br /><br />Lure Researcher: “Yeah, you know, it’ll depend on the individual fish, but yeah, probably.”<br />Boss: “How about them green worms?”<br /><br />Lure Researcher: “Uhhh……”<br /><br />Boss: “Aw hell, them green worms is cheatin’. Ship it.”</blockquote>Around these parts, a “keeper” bluegill is only 6-8” long.<br /><br />On an unrelated note, I’ve decided that for my upcoming birthday, I’m going to get me a high-quality fillet knife.<br /><br /><a href="http://2.bp.blogspot.com/-nkeooCr4ZsY/ThTuagah5_I/AAAAAAAABbc/vyENgx9zbCI/s1600/IMG_20110703_181608.jpg"><img style="display:block; margin:0px auto 10px; text-align:center;cursor:pointer; cursor:hand;width: 400px; height: 299px;" src="http://2.bp.blogspot.com/-nkeooCr4ZsY/ThTuagah5_I/AAAAAAAABbc/vyENgx9zbCI/s400/IMG_20110703_181608.jpg" alt="" id="BLOGGER_PHOTO_ID_5626383973637810162" border="0" /></a>CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com3tag:blogger.com,1999:blog-24442373.post-51204217524834641882011-05-29T22:46:00.005-06:002012-03-27T11:24:17.296-06:00Those Two Little WordsHere at Me, CherkyB, I rarely wax philosophical. Lately, I haven't been waxing much of anything.<br /><br />Saying that made me think about how I have never waxed my truck, despite having it over a year. Unless you count carwash wax. But I digress.<br /><br />The past week has given me pause to reflect upon the power of two simple words in our language. You see, last weekend was what we like to call PMS Weekend. I've noted that <a href="http://cherkyb.blogspot.com/2007/01/so-much-to-say.html">before</a>. Actually, a <a href="http://cherkyb.blogspot.com/search?q=pms+weekend">number of times</a>, given it is a regular occurrence. The Mrs. was all crabby and blaming it on me, as per usual. She even rehashed the standard revelation:<br /><blockquote>Me, CherkyB: "Why do you have to be so nasty?"<br /><br />The Mrs.: "<span style="font-style: italic;">I'm</span> not nasty. <span style="font-style: italic;">You're</span> the nasty one. You know why you think I'm nasty? You know what's different this time?"<br /><br />Me, CherkyB: "Oh for God's sake. Don't give me that, 'I've just decided not to put up with your crap anymore,' line again. Every month you get really nasty, and then you say, 'I've just decided not to put up with your crap anymore,' like it's some kind of new behavior. It's PMS. In a couple of days, it'll be over, and you'll be back to normal."<br /><br />The Mrs.: "It is <span style="font-style: italic;">not</span> PMS. I've just decided not to put up with your crap anymore, and so you interpret that as me being nasty."<br /><br />Me, CherkyB: "Yes dear."</blockquote><br />[I might note that about a half hour later, The Mrs. came wandering into the room and declared, "You were right. It was just PMS." I thought I'd immortalize that here, but she'll probably deny it and insist she just decided not to put up with my crap anymore right up until the very moment her PMS ended, and then she decided to put up with it again "for the sake of the marriage."]<br /><br />So, in the couple days leading up to that fateful moment, I got to use those two little words that all marriage counselors and self-help gurus tell you are the key to a lasting relationship. I know, I know, it's kind of cliché, but you all know that deep down inside, I'm a sappy romantic. I'm pretty sure <a href="http://cherkyb.blogspot.com/2010/03/cherkyb-romantic.html">I've talked about that before</a>.<br /><br />You all know what I'm talking about. The two magic words that make it all OK:<br /><br />Right now.<br /><blockquote>"You have no idea how much I hate you...right now."</blockquote><br />See? All better.CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com5tag:blogger.com,1999:blog-24442373.post-12235820882308100932011-03-28T20:24:00.001-06:002011-03-28T20:24:35.212-06:00The real problemI've cut way back on my drinking, and you should never blog sober.CherkyBhttp://www.blogger.com/profile/11541573745834007922noreply@blogger.com3